Marble, granite & terrazzo restoration across Ontario since 1972
Call (905) 270-2959Limestone · Worn down by traffic, grit, and cleaners
Limestone entries with patchy wear, honed across the whole floor to an even matte or satin finish.
No obligation · We reply within one business day
Limestone · Polishing
Grit polishes the paths people walk on honed limestone, so some areas turn glossy while others stay matte. Touching up single spots shows, so we hone the whole entry to your existing matte or light satin finish.
Quick diagnosis
Compare a closet or corner with the main walking path. If the sheen differs between the two, it's wear, not only dirt.
Still unsure? Send photos for a free quote, or read our Dull Stone Polishing guide.
Restore vs replace
Limestone entries are mortared down over large areas. Restoring the floor saves hunting for matching tile and redoing the subfloor.
Repair path
We remove wax, coatings, and ground-in dirt.
Filling them first stops honing from pulling out loose pieces.
Diamond pads, from coarse to fine (often 200 to 800 grit), remove scratches and leave an even satin base.
Finer pads (1,500 to 3,000+ grit) give a soft sheen, a semi-gloss, or a mirror shine.
A sealer for stone that absorbs liquid, and regular maintenance visits for commercial floors.
Our work
After
BeforeIf the stone is sound, a dull marble floor can be honed and polished instead of torn out.
Dull Stone Polishing · Powder room floors
How we treat this
After
BeforeA stained, scuffed marble lobby floor can be cleaned, honed, and sealed while the building stays open.
Dull Stone Polishing · Commercial lobbies
How we treat this
After
BeforeA foyer floor worn flat by traffic can be honed and polished until it reflects the room again.
Dull Stone Polishing · Foyer floors
How we treat thisBefore you DIY
FAQ
Free quote
Send photos of the damage. We'll tell you what it is and quote the work before anything starts.
No obligation · We reply within one business day
